IPC 7 English version
F17C-F17C01312

SECTION F – MECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING


F 17STORING OR DISTRIBUTING GASES OR LIQUIDS (water supply E03B)


F 17 CVESSELS FOR CONTAINING OR STORING COMPRESSED, LIQUEFIED, OR SOLIDIFIED GASES; FIXED-CAPACITY GAS-HOLDERS; FILLING VESSELS WITH, OR DISCHARGING FROM VESSELS, COMPRESSED, LIQUEFIED, OR SOLIDIFIED GASES (storing fluids in natural or artificial cavities or chambers in the earth B65G 5/00; construction or assembling of bulk storage containers employing civil-engineering techniques E04H 7/00; variable-capacity gas-holders F17B; liquefaction or refrigeration machines, plants, or systems F25)


Subclass Index

VESSELS UNDER PRESSURE; VESSELS NOT UNDER PRESSURE; DETAILS 

F17C 1/00; F17C 3/00; F17C 13/00 

FILLING; DISCHARGING 

F17C 5/00, F17C 6/00; F17C 7/00, F17C 9/00 

USE OF GAS-SOLVENTS OR GAS-ABSORBENTS 

F17C 11/00 



1/

00Pressure vessels, e.g. gas cylinder, gas tank, replaceable cartridge (pressurised apparatus for purposes other than storage, see the relevant subclasses such as A62C, B05B; associated with vehicles, see the appropriate subclass of classes B60 to B64; pressure vessels in general F16J 12/00)

1/

02.involving reinforcing arrangements  [4]

1/

04..Protecting sheatings

1/

06...built-up from wound-on bands or filamentary material, e.g. wires  [4]

1/

08..Integral reinforcements, e.g. ribs

1/

10.with provision for protection against corrosion, e.g. due to gaseous acid (inhibiting corrosion of metallic material or incrustation in general C23F)  [4]

1/

12.with provision for thermal insulation (thermal insulation in general F16L 59/00)  [4]

1/

14.constructed of aluminium; constructed of non-magnetic steel

1/

16.constructed of plastics materials


3/

00Vessels not under pressure

3/

02.with provision for thermal insulation (thermal insulation in general F16L 59/00)

3/

04..by insulating layers (F17C 3/08 takes precedence)

3/

06...on the inner surface, i.e. in contact with the stored fluid  [4]

3/

08..by vacuum spaces, e.g. Dewar flask (for household use A47J 41/02)

3/

10..by liquid-circulating or vapour-circulating jackets

3/

12.with provision for protection against corrosion, e.g. due to gaseous acid (protection against corrosion in general C23F)


5/

00Methods or apparatus for filling pressure vessels with liquefied, solidified, or compressed gases (adding propellants to aerosol containers B65B 31/00)

Note

 This group covers:

 the filling of vessels for storage of compressed or liquefied gases;

 the filling of pressurised apparatus insofar as it is not covered by a single other subclass, e.g. A62C, B05B.

5/

02.for filling with liquefied gases

5/

04..requiring the use of refrigeration, e.g. filling with helium or hydrogen

5/

06.for filling with compressed gases


6/

00Methods or apparatus for filling vessels not under pressure with liquefied or solidified gases  [3]


7/

00Methods or apparatus for discharging liquefied, solidified, or compressed gases from pressure vessels, not covered by another subclass

7/

02.Discharging liquefied gases

7/

04..with change of state, e.g. vaporisation  [3]


9/

00Methods or apparatus for discharging liquefied or solidified gases from vessels not under pressure

9/

02.with change of state, e.g. vaporisation

9/

04..Recovery of thermal energy  [3]


11/

00Use of gas-solvents or gas-sorbents in vessels


13/

00Details of vessels or of the filling or discharging of vessels

13/

02.Special adaptations of indicating, measuring, or monitoring equipment (measuring in general G01)

13/

04.Arrangement or mounting of valves (valves per se F16K)

13/

06.Closures, e.g. cap, breakable member (closures for containers in general B65D)

13/

08.Mounting arrangements for vessels

13/

10.Arrangements for preventing freezing

13/

12.Arrangements or mounting of devices for preventing or minimising the effect of explosion (flame traps A62C 4/00)